Product finder

Woods

Abrasifs JJS (sia-Canada) offer you a complete line of high quality abrasives specifically developped for wood industry. We offer you sanding systems adapted to your particular needs whatever the surface you have to treat.

We offer you hook-and-loop (siafast) and PSA (sialink) fastening system for sanding discs, sanding strips and sanding rolls,sanding sponges, and sanding belts as well. We also offer complementary accessories such as back pads, sanding block and graphite cushions for sanding belts.

Wood - Finishing systems for solid wood, wood-based materials and varnishes

Wood - Finishing systems for solid wood, wood-based materials and varnishes

Do not forget to look at our flyer describing our sanding solutions for wood as well our table for applications.

You will find below series of abrasives dedicated to wood industries.

1707 siapar
Applications
  • roughening insulation panels
  • sanding off plaster, stone and concrete
  • sanding off paint and old varnish
  • sanding of solid wood
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Angle grinder
Hand sanding with sanding block
1718 siapan TopTec
Applications
  • pad sanding of trimmed particle boards, MDF and hard fibre boards
  • sanding before direct painting
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Combined wide belt sanding
Contact wide belt sanding
Pad wide belt sanding
1719 sialac
Applications

• Keying primers

• Fine sanding of primer filler

• Intermediate sanding of lacquers

Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Application area
Combined wide belt sanding
Cross belt sanding
1729 sialac TopTec
Applications
  • intermediate sanding of UP and PUR varnish systems
  • intermediate sanding of UV varnish systems
  • polishing preparation for high-gloss surfaces
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Combined wide belt sanding
Contact wide belt sanding
Cross belt sanding
Pad wide belt sanding
Pressure beam sanding
1730 sialac
Applications

• Intermediate sanding on industrial varnishing systems

• Final sanding as preparation for painting

Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Application area
Combined wide belt sanding
Cross belt sanding
1748 siarexx fine
Applications
  • intermediate sanding of varnish
  • keying of primers and fillers
  • fine sanding of profiles and contours
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Hand sanding
Hand sanding with sanding block
Hand sanding with siasoft
Orbital sander
Random orbital sander
1749 siaral TopTec
Applications
  • calibrating MDF and chipboard surfaces
  • preparation sanding before veneering or laminating
  • removal of synthetic resin and laminate layers
  • final sanding on transom and high-quality veneers
  • priming preparation of MDF
  • fine sanding of MDFand chipboard surfaces
  • fine sanding of slate and marble pieces
  • coarse to fine sanding of composite materials
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Angle grinder
Combined wide belt sanding
Contact wide belt sanding
Cross belt sanding
Drum sanding
Edge belt sanding
Pad wide belt sanding
Pressure beam sanding
Random orbital sander
Stationary disc sanding
Stroke belt sanding
1796 sialac
Applications
  • keying and dulling of primers
  • intermediate sanding of thin varnishes
  • final sanding to prepare for polishing
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Combined wide belt sanding
Contact wide belt sanding
Cross belt sanding
Drum sanding
Pad wide belt sanding
Stroke belt sanding
1909 siawood
Applications
  • Coarse sanding of solid wood and wood-based materials
  • Fine sanding of solid wood, veneers and wood-based materials
  • Keying of primers and melamine foils
  • Intermediate varnish sanding
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Combined wide belt sanding
Cross belt sanding
Pressure beam sanding
1918 sialac
Applications

• Keying of works priming coats

• Keying and matting of primers and melamine sheets

• Intermediate sanding of lacquers

• Fine sanding before lacquering

• Final sanding as preparation for painting

Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Application area
Combined wide belt sanding
Cross belt sanding
1919 siawood
Applications
  • keying and dulling of primers
  • intermediate sanding of varnishes
  • final sanding to prepare for polishing
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Combined wide belt sanding
Contact wide belt sanding
Cross belt sanding
Drum sanding
Edge belt sanding
Pad wide belt sanding
Pressure beam sanding
Stroke belt sanding
1919+ siawood
Applications
  • Calibrating surfaces
  • Coarse sanding of solid wood and wood-based materials
  • Fine sanding of solid wood, veneers and wood-based materials
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Combined wide belt sanding
Discs
Hand sanding
Hand sanding with sanding block
Portable belt sander
Random orbital sander
Rolls
1920 siawood TopTec
Applications
  • flush sanding of edges, edge strips and protrusions
  • calibrating, medium and fine sanding of surfaces
  • medium to fine sanding of solid and veneered surfaces
  • intermediate sanding of polyester varnishes
  • flatting of edges and rabbets
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Combined wide belt sanding
Contact wide belt sanding
Cross belt sanding
Edge belt sanding
Pad wide belt sanding
Pressure beam sanding
Stroke belt sanding
1944 siaone
Applications

• Sanding off coatings and impurities

• Sanding out unevenness at the edges of repaired surfaces

• Flatting bodyfiller and primer filler

• Fine sanding primer filler

• Keying old and new lacquers

 

Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Discs
1948 siaflex
Applications
  • Sanding out of unevenness
  • Keying old and new paints
  • Removal of orange-peel effect and dust inclusions
  • Ideal combination of surface quality and stock removal on wood, lacquer, paint, primer and filler
  • Versatile all-round product with an attractive range of options
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Discs
Hand sanding
Hand sanding with sanding block
Hand sanding with siasoft
Orbital sander
Random orbital sander
Rolls
1960 siarexx cut
Applications
  • keying and sanding off varnish and paint
  • sanding of solid wood and veneer
  • keying and fine sanding of primer and filler
  • sanding after wetting the wood surface
  • intermediate sanding of varnish on surfaces and curves
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Hand sanding
Hand sanding with sanding block
Orbital sander
1960 siarexx cut siafast
Applications
  • keying and sanding off varnish and paint
  • sanding of solid wood and veneer
  • keying and fine sanding of primer and filler
  • sanding after wetting the wood surface
  • intermediate sanding of varnish on surfaces and curves
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Hand sanding with sanding block
Orbital sander
Random orbital sander
2718 siapan z TopTec
Applications
  • calibrating, medium and fine sanding of particle boards, MDF and hard fibre boards
  • a product from coarse to fine
  • can be used as wide belt and segmented belt
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Combined wide belt sanding
Contact wide belt sanding
Pad wide belt sanding
2812 siaral x
Applications
  • flush sanding of protrusions on cross-grained wood
  • flatting of edges and rabbets
  • coarse sanding of wood based panels and hard wood
  • coarse to fine sanding in parquet and plywood production
  • coarse to fine sanding of glued solid wood panels
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Contact wide belt sanding
Cross belt sanding
Edge belt sanding
Platen belt sanding
Pressure beam sanding
Slack-of-belt sanding
2820 siamet
Applications
  • deburring and edges breaking
  • smooth grinding of welding seams and joints in hard to reach areas
  • keying of soldered and welded points on steel
  • grinding of radii in tool and mould manufacture
  • descaling of steel
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Contact Pressure
Light
High
Application area
Angle grinder
Contact belt sanding
Contact wide belt sanding
Platen belt sanding
Slack-of-belt sanding
Stroke belt sanding
2909 siawood
Applications

• Calibrating, intermediate and fine sanding of surfaces

• Flatting of edges and rabbets

• Calibrating solid wood

• Flush sanding of edges, edge bands and protrusions

Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Edge belt sanding
Platen belt sanding
Portable belt sander
Rolls
Slack-of-belt sanding
Stroke belt sanding
2920 siawood TopTec
Applications
  • flush sanding of edges and rabbets
  • fine sanding of surfaces and edges
  • coarse to fine sanding in plywood production
  • coarse to fine sanding of glued soft wood boards
  • sanding off old varnish and paint
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Angle grinder
Combined wide belt sanding
Contact wide belt sanding
Cross belt sanding
Drum sanding
Edge belt sanding
Pad wide belt sanding
Platen belt sanding
Pneumatic drum sanding
Portable belt sander
Pressure beam sanding
Random orbital sander
Slack-of-belt sanding
Stationary disc sanding
2921 siawood x
Applications

• Sanding and removal of paints and lacquers

• Flush sanding of edges and edge bands

• Sanding down of solid wood

Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Portable belt sander
2933 siatur TopTec
Applications
  • coarse to fine sanding on curves and profiles
  • sanding off old varnish
  • flush sanding of edges, rabbets and protrusions
  • pre- and post-treatment of surfaces and curves
  • particularly suitable for pneumatic rolls
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Brush finishing
Pneumatic drum sanding
Portable belt sander
Profile belt sanding
Slack-of-belt sanding
Stroke belt sanding
2936 siatur jj
Applications
  • shaped and fine sanding of profiles and contours
  • intermediate sanding of curves and profiles
  • suitable for pneumatic rolls
  • particularly suitable for sanding brushes
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Contact Pressure
Light
High
Application area
Brush finishing
Hand sanding
Hand sanding of turned lathe-work
Pneumatic drum sanding
Profile belt sanding
Slack-of-belt sanding
Stroke belt sanding
2943 siatur h
Applications
  • fine sanding of profiles of hard and soft wood as well as MDF
  • sanding curves and raised panels
  • lateral sanding of curved work pieces
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Profile wheel sanding
2951 siatur h
Applications
  • medium to fine sanding of curves and profiles
  • keying of primers and fillers
  • intermediate sanding of varnish on curves and profiles
  • suitable for sanding brushes
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Brush finishing
Hand sanding
Hand sanding of turned lathe-work
Pneumatic drum sanding
Profile belt sanding
3708 siapan TopTec
Applications
  • Calibrating, medium and fine sanding of particle boards, MDF and hard fibre boards
  • Rear sanding of laminate panels
  • Key product, meets extreme requirements for surface quality
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Combined wide belt sanding
Contact wide belt sanding
Pad wide belt sanding
7500 sianet CER - 7900 sianet
Applications

7900 sianet

  • Keying paints, lacquers, bodyfillers, primer fillers and plastics
  • Intermediate lacquer sanding
  • Fine sanding surfaces and edges
  • Preparation for polishing on high-gloss surfaces
  • Sanding off coatings and impurities
  • Keying primers
  • Fine sanding solid wood, veneers, solid surface materials priming foil, plaster and plasterboard
  • Intermediate sanding of varnishes

7500 sianet CER

  • Sanding off coatings and impurities
  • Keying primers
  • Fine sanding solid wood, veneers, solid surface materials, priming foil, plaster and plasterboard
  • Intermediate sanding of varnishes
Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Application area
Discs
Hand sanding with sanding block
Orbital sander
Random orbital sander
Rolls
7979 siasponge flat
Applications

• Keying of wood and plastics

• Keying conventional old and new varnishes, primer filler and paints

• Fine sanding primer filler in hard-to-reach areas

• Scuffing lacquers

• Flatting primer filler

• Intermediate sanding of lacquers

Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Contact Pressure
Light
High
Application area
Hand sanding
Orbital sander
7983 siasponge flex
Applications

• Keying of wood and plastics

• Keying conventional old and new varnishes, primer filler and paints

• Fine sanding primer filler in hard-to-reach areas

• Scuffing lacquers

• Flatting bodyfiller and primer filler

• Intermediate sanding of lacquers

Properties
The following properties refer to the materials used in the main application
Removal Rate
Low
Very High
Lifetime
Short
Very Long
Finish
Medium
Very Good
Flexibility
Very Rigid
Highly Flexible
Contact Pressure
Light
High
Application area
Hand sanding
Orbital sander

Product finder

News

New logo!

Wednesday, December 23 2020

JJS launch a new company logo.

  see details


New National Sales Manager

Wednesday, December 16 2020

JJS appoints new National Sales Manager

  see details


2988 & 6130 siamop

Thursday, August 6 2020

  see details


  see complete list