Composite
Abrasifs JJS (sia-Canada) offer you a complete line of high quality abrasives specifically developped for composite industry. We offer you sanding systems adapted to your particular needs whatever the type of surface that you have to treat.
We offer you hook-and-loop (siafast) and PSA (sialink) fastening system for sanding discs, sanding strips and sanding rolls,sanding sponges, and sanding belts as well. We also offer a polishing solution for composites and complementary accessories such as back pads and sanding blocks.
Do not forget to look at our flyer describing our sanding solutions for composite as well our table for applications
You will find below series of abrasives dedicated to composite industries.
- calibrating MDF and chipboard surfaces
- preparation sanding before veneering or laminating
- removal of synthetic resin and laminate layers
- final sanding on transom and high-quality veneers
- priming preparation of MDF
- fine sanding of MDFand chipboard surfaces
- fine sanding of slate and marble pieces
- coarse to fine sanding of composite materials











- performance-oriented treatment of steel, stainless steel and aluminium
- deburring
- dressing and rust removal
- keying of large surface
- smooth grinding of welding seams and joints


- Sanding off of coatings and impurities
- Sanding out of unevenness at the edges of repaired surfaces
- Flatting of bodyfiller and primer filler
- Fine sanding of primer filler
- Keying of old and new varnishes
- Removal of paint runs, orange-peel effect and dust inclusions





• Sanding off coatings and impurities
• Sanding out unevenness at the edges of repaired surfaces
• Flatting bodyfiller and primer filler
• Fine sanding primer filler
• Keying old and new lacquers

- treatment of weld seams and joints
- grinding of areas
- deburring and edge breaking
- general dressing work

- cleaning
- stripping down layers of scale and rust
- deburring of castings (grey, spheroidal, malleable cast iron)
- treatment of natural and synthetic stone, concrete, ceramics
- treatment of glass-fibre-reinforced plastics

- grinding off weld seams
- grinding of aluminium castings
- grinding of areas
- deburring and edges breaking
- general dressing work


- keying of e-coat
- keying of solid colour paint
- final sanding of primer filler (with D/A sander)
- matting of lacquer or metallic colour coats
- matting of water soluble lacquers and bright metallic
- matting of sensitive paint and lacquer


- treatment of conventional and extremely scratchresistant clear varnishes before polishing
- fine sanding of round edges, contours and also concave / convex shapes
- sanding for blending
- sanding of mineral substances
- producing a mat finish on surfaces


- hard factory primers
- scratch-resistant lacquers
- gelcoat (polyester and epoxy)
- primers (epoxy)
- hard fillers
- primer and melamine films

7900 sianet
- Keying paints, lacquers, bodyfillers, primer fillers and plastics
- Intermediate lacquer sanding
- Fine sanding surfaces and edges
- Preparation for polishing on high-gloss surfaces
- Sanding off coatings and impurities
- Keying primers
- Fine sanding solid wood, veneers, solid surface materials priming foil, plaster and plasterboard
- Intermediate sanding of varnishes
7500 sianet CER
- Sanding off coatings and impurities
- Keying primers
- Fine sanding solid wood, veneers, solid surface materials, priming foil, plaster and plasterboard
- Intermediate sanding of varnishes





- The grit range classifications used for siasponge products

News
New logo!
Wednesday, December 23 2020
JJS launch a new company logo.
New National Sales Manager
Wednesday, December 16 2020
JJS appoints new National Sales Manager